Dragino
QTRACA supports the following topology and devices from Dragino. LPS8v2 Gateway Sensors connect to the LPS8v2 gateway which will then send d...
Thu, 4 Dec, 2025 at 10:21 PM
Before setting up your Dragino gateway you should generate your API key in QTRACA. To do this go to Setup--> Account Settings. Scroll down to th...
Sat, 4 May, 2024 at 4:45 PM
For each sensor you have you will need to set it up in QTRACA. To do this follow these steps: Go to 'Remote Devices' Click on 'New IoT Dev...
Tue, 7 May, 2024 at 10:48 AM
To connect to the gateway you can either use an ethernet cable or connect by Wi-Fi. Cable to Router (Recommended) Connect the LPS8-V2 Ethernet port ...
Fri, 20 Dec, 2024 at 5:09 PM
Connect to the LPS8V2 Open a browser on the PC and type the LPS8-V2 ip address (depends on your connect method) http://IP_ADDRESS or http://172.31....
Tue, 31 Mar, 2026 at 7:58 PM
This guide walks you through two important setup steps to ensure your gateway maintains a reliable internet connection: Step 1 Set a Static IP Addr...
Wed, 1 Apr, 2026 at 7:20 PM
Launch Chirpstack from the gateway by going to 'Server' --> 'Network Server' and click the 'Launch' button. Troubleshoot...
Tue, 2 Dec, 2025 at 5:57 PM
Once in the Chirpstack console on your Gateway perform the following steps to add a new device. Go to Tenant --> Applications and then click on the n...
Tue, 2 Dec, 2025 at 6:12 PM
The LHT65N has two working modes: Deep Sleep Mode: LHT65N doesn't have any LoRaWAN activation. This mode is used for storage and shipping to save ...
Tue, 7 May, 2024 at 11:01 AM
The power on the LTC2 is of when device is shipped from factory. To turn power on, unscrew the back cover of the LTC2 and put a Jumper on JP2 to power o...
Thu, 4 Dec, 2025 at 10:36 PM