QTRACA supports the following topology and devices from Dragino.
Sensors connect to the LPS8v2 gateway which will then send data on to QTRACA IoT cloud. This gateway is required to send data to QTRACA.
Be sure to order correct frequency for your region when purchasing.
LPS8v2-XX
XX: Frequency Band
AS923: LoRaWAN AS923 band
AU915: LoRaWAN AU915 band (Australia and New Zealand)
EU868: LoRaWAN EU868 band
KR920: LoRaWAN KR920 band
US915: LoRaWAN US915 band
IN865: LoRaWAN IN865 band
The Dragino LHT65S Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external sensor connector to connect to an external Temperature Sensor.
The LHT65S allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
LHT65S has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
LHT65S is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
LHT65S supports Datalog feature. It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
Be sure to order correct frequency for your region when purchasing.
LHT65S-XX
XX: The default frequency band
AS923: LoRaWAN AS923 band
AU915: LoRaWAN AU915 band (Australia and New Zealand)
EU433: LoRaWAN EU433 band
EU868: LoRaWAN EU868 band
KR920: LoRaWAN KR920 band
US915: LoRaWAN US915 band
IN865: LoRaWAN IN865 band
CN470: LoRaWAN CN470 band
The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external sensor connector to connect to an external Temperature Sensor.
The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years.
LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
LHT65N supports Datalog feature. It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
Be sure to order correct frequency for your region when purchasing.
LHT65N-XX
XX: The default frequency band
AS923: LoRaWAN AS923 band
AU915: LoRaWAN AU915 band (Australia and New Zealand)
EU433: LoRaWAN EU433 band
EU868: LoRaWAN EU868 band
KR920: LoRaWAN KR920 band
US915: LoRaWAN US915 band
IN865: LoRaWAN IN865 band
CN470: LoRaWAN CN470 band
The Dragino LTC2 Industrial LoRaWAN Temperature Transmitter is designed to monitor temperature for different environments.
LTC2 is powered by 8500mA Li-SOCI2 battery for long time measurement. The battery can run 2~10 years depends on the network environment and working mode.
Be sure to order correct probe and frequency for your region when purchasing.
The LTC1/LTC2-LB is the preferred sensor over the LTC2-SI sensor due to these features:
|
LTC2-XX-YY:
XX: probe option, spec see datasheet
SI: Standard IP68
FSA: Food Safety
FT: Flat Type
LT: Low Temperature
HT: High Temperature
NA: No Probe
YY: the default frequency band
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915 (Australia and New Zealand)
US915: Default frequency band US915